2017 EBY

 

STANDARD SPECIFICATIONS É

Available Dimensions:

Floor Length:  24Õ6Ó, 26Õ, 27Õ6Ó, 29Õ, 30Õ6Ó, 32Õ, 35Õ
Outside Width:  7Õ3Ó, 8Õ, 8Õ6Ó
Inside Height:  6Õ6Ó, 7Õ, 7Õ6Ó

Running Gear:

GVWR: 19,000 lbs Ð 8,000 lb axles.  25,000 lbs Ð (3) 8,000lb axles.  25,000lbs Ð 10,000 lb axles.
Axles:  (2) 8,000# rubber ride (greased packed bearings), 102Ó wide on 24Õ6Ó and 26Õ length.  (2) 10,000# rubber ride ( greased packed bearings), 102Ó wide on 27Õ6Ó and longer lengths.
Wheels:  17.5 x 6.75 heavy duty steel wheel, 8-lug.
Tires:  (4) 9R17.5 steel belted radials, load range G on 8,000# axles.  (4) 235/75R17.5 steel belted radials, load range H on 10,000# axles.
Brakes:  12-1/4Ó x 3-3/8Ó electric on 8,000# axles.  12-1/4Ó x 4Ó electric on 10,000# axles.
Safety Equip.:  Two chains and electronic breakaway kit.
Landing Gear:  Single drop leg, two speed, roadside crank with crank bushing.
Bogie:  Extruded aluminum bogie rails.  See engineered drawing for location.

Nose Construction:

Nose Assembly:  9¼ tapered nose with .080 aluminum smooth sheet sides and front, with aerodynamic Eby cast aluminum corner caps with extruded front corner posts.
Posts:  4-1/2Ó extruded aluminum hat shaped posts.
Bottom Rails:  10-1/2Ó extruded aluminum.
Crossmembers:  5Ó fabricated aluminum on 19Ó centers
Floor:  1/8Ó aluminum smooth sheet.
Upper Coupler:  5/16Ó x 5Ó x 7Ó tubular steel.
Lower Coupler:  2-5/16Ó ball coupler (30,000# ball rating) with steel hitch post section and aluminum front gusset, adjustable height 28Ó Ð 36-1/2Ó from ground to top of ball.

Box Construction:

Sheet:  .075 5454 H34 aluminum smooth sheet, riveted to side posts with Ó rivets on 4Ó centers.  Punched air openings per chosen pattern, vertically ribbed.
Posts:  Extruded aluminum, 1Ó x 4-1/2Ó hat shaped side posts with integral closure track, spaced on 18? centers.
Bottom Rails:  7Ó tall extruded aluminum.
Top Rails:  6Ó extruded aluminum.
Crossmembers:  3Ó extruded aluminum I-beams on 12Ó centers.
Floor:  .115 6061 T6 aluminum diamond plate with (4) 1Ó high ridges, longitudinally on 19Ó centers.
Side Door:  28-1/2Ó wide, curb side.
Rear Frame:  3Ó x 5Ó extruded aluminum with Eby cast aluminum corner caps.
Rear Door:  Full swing with (3) 4Ó extruded aluminum offset hinges for extended swing radius.  Hinges are mechanically fastened and welded to rear frame.  Exterior sliding door on roadside with polyurethane rollers at the top and UHMW wear pads at the threshold.

Roof Assembly:

Sheet: One-piece .040 aluminum, screwed  to top rail on 4Ó centers.
Bows: Flat, hat shaped 1-1/2Ó x 4Ó extruded aluminum on 24Ó centers.

Partitions:

Std. Partition: Extruded aluminum tube and punched sheet construction with (2) horizontal stiffener rails and outside release slam latch.  Extruded aluminum pipe hinge with nylon bushing mounted curbside. Partition located at front of wheel wells.
Nose Partition: Bottom hinged, punched sheet construction with (2) self-catching rotary latches.

Lights & Wiring:

Lights:   12-volt D.O.T. approved, LED. With chrome bezels on marker lights.
Wiring:  A.T.A. color coded, sealed wiring harness.
Rear Lights:  QuadraLight, turn-tail-stop-back up, LED.  One light each side.
Inside Lights:  Two LED, with external rear water resistant switch.

Miscellaneous:

Tire Carrier:  Aluminum, mounted on exterior drop sheet.
Wheel Pockets:  Combination of 1/8Ó formed aluminum smooth sheet and heavy duty extruded axle rail.
Fenders:  Extruded rolled aluminum.
Bumpers:  Full width 3Ó molded rubber.
Skid Plates:  (3) 3/16Ó formed aluminum.
Paint:  Steel parts painted silver.
Conspicuity Tape:  Meets all US and Canadian regulations.

Popular options 

  • 7′ Inside height
  • Rolling gate
  • 1/2 sliding or hinged pass through doors in interior gates
  • Spare wheel and tire
  • Plexiglas closures
  • Aluminum closures
  • Belly vents
  • Nose Vents

Ruff Neck trailers also are available with convenient option packages

  • Combo Package
    • Converts existing 4′ of trailer into tack room which includes a permanent straight wall, sealed camper door, windows in the nose, and an inside light with seperate switch.
  • Trophy Package
    • Includes Black Panels on side of nose, Stainless Steel front corners, polished aluminum corner caps, inside and outside tie rail, extra light package, 1/2 sliding pass through door in center divider
  • Trophy Plus Package
    • Trophy package with a rolling gate in lieu of the std permanent gate
  • Final Drive Package
    • Trophy package with 48? wide drop ramp curbside and escape door roadside, Rolling gate in addition to std. gate, loading light over ramp.
2017 EBY Diamond K Sales

 

STANDARD SPECIFICATIONS É

Available Dimensions:

Floor Length:  24Õ6Ó, 26Õ, 27Õ6Ó, 29Õ, 30Õ6Ó, 32Õ, 35Õ
Outside Width:  7Õ3Ó, 8Õ, 8Õ6Ó
Inside Height:  6Õ6Ó, 7Õ, 7Õ6Ó


Running Gear:

GVWR: 19,000 lbs Ð 8,000 lb axles.  25,000 lbs Ð (3) 8,000lb axles.  25,000lbs Ð 10,000 lb axles.
Axles:  (2) 8,000# rubber ride (greased packed bearings), 102Ó wide on 24Õ6Ó and 26Õ length.  (2) 10,000# rubber ride ( greased packed bearings), 102Ó wide on 27Õ6Ó and longer lengths.
Wheels:  17.5 x 6.75 heavy duty steel wheel, 8-lug.
Tires:  (4) 9R17.5 steel belted radials, load range G on 8,000# axles.  (4) 235/75R17.5 steel belted radials, load range H on 10,000# axles.
Brakes:  12-1/4Ó x 3-3/8Ó electric on 8,000# axles.  12-1/4Ó x 4Ó electric on 10,000# axles.
Safety Equip.:  Two chains and electronic breakaway kit.
Landing Gear:  Single drop leg, two speed, roadside crank with crank bushing.
Bogie:  Extruded aluminum bogie rails.  See engineered drawing for location.

Nose Construction:

Nose Assembly:  9¼ tapered nose with .080 aluminum smooth sheet sides and front, with aerodynamic Eby cast aluminum corner caps with extruded front corner posts.
Posts:  4-1/2Ó extruded aluminum hat shaped posts.
Bottom Rails:  10-1/2Ó extruded aluminum.
Crossmembers:  5Ó fabricated aluminum on 19Ó centers
Floor:  1/8Ó aluminum smooth sheet.
Upper Coupler:  5/16Ó x 5Ó x 7Ó tubular steel.
Lower Coupler:  2-5/16Ó ball coupler (30,000# ball rating) with steel hitch post section and aluminum front gusset, adjustable height 28Ó Ð 36-1/2Ó from ground to top of ball.

Box Construction:

Sheet:  .075 5454 H34 aluminum smooth sheet, riveted to side posts with Ó rivets on 4Ó centers.  Punched air openings per chosen pattern, vertically ribbed.
Posts:  Extruded aluminum, 1Ó x 4-1/2Ó hat shaped side posts with integral closure track, spaced on 18? centers.
Bottom Rails:  7Ó tall extruded aluminum.
Top Rails:  6Ó extruded aluminum.
Crossmembers:  3Ó extruded aluminum I-beams on 12Ó centers.
Floor:  .115 6061 T6 aluminum diamond plate with (4) 1Ó high ridges, longitudinally on 19Ó centers.
Side Door:  28-1/2Ó wide, curb side.
Rear Frame:  3Ó x 5Ó extruded aluminum with Eby cast aluminum corner caps.
Rear Door:  Full swing with (3) 4Ó extruded aluminum offset hinges for extended swing radius.  Hinges are mechanically fastened and welded to rear frame.  Exterior sliding door on roadside with polyurethane rollers at the top and UHMW wear pads at the threshold.

Roof Assembly:

Sheet: One-piece .040 aluminum, screwed  to top rail on 4Ó centers.
Bows: Flat, hat shaped 1-1/2Ó x 4Ó extruded aluminum on 24Ó centers.

Partitions:

Std. Partition: Extruded aluminum tube and punched sheet construction with (2) horizontal stiffener rails and outside release slam latch.  Extruded aluminum pipe hinge with nylon bushing mounted curbside. Partition located at front of wheel wells.
Nose Partition: Bottom hinged, punched sheet construction with (2) self-catching rotary latches.

Lights & Wiring:

Lights:   12-volt D.O.T. approved, LED. With chrome bezels on marker lights.
Wiring:  A.T.A. color coded, sealed wiring harness.
Rear Lights:  QuadraLight, turn-tail-stop-back up, LED.  One light each side.
Inside Lights:  Two LED, with external rear water resistant switch.

Miscellaneous:

Tire Carrier:  Aluminum, mounted on exterior drop sheet.
Wheel Pockets:  Combination of 1/8Ó formed aluminum smooth sheet and heavy duty extruded axle rail.
Fenders:  Extruded rolled aluminum.
Bumpers:  Full width 3Ó molded rubber.
Skid Plates:  (3) 3/16Ó formed aluminum.
Paint:  Steel parts painted silver.
Conspicuity Tape:  Meets all US and Canadian regulations.

Popular options 

  • 7' Inside height
  • Rolling gate
  • 1/2 sliding or hinged pass through doors in interior gates
  • Spare wheel and tire
  • Plexiglas closures
  • Aluminum closures
  • Belly vents
  • Nose Vents

Ruff Neck trailers also are available with convenient option packages

  • Combo Package
    • Converts existing 4' of trailer into tack room which includes a permanent straight wall, sealed camper door, windows in the nose, and an inside light with seperate switch.
  • Trophy Package
    • Includes Black Panels on side of nose, Stainless Steel front corners, polished aluminum corner caps, inside and outside tie rail, extra light package, 1/2 sliding pass through door in center divider
  • Trophy Plus Package
    • Trophy package with a rolling gate in lieu of the std permanent gate
  • Final Drive Package
    • Trophy package with 48? wide drop ramp curbside and escape door roadside, Rolling gate in addition to std. gate, loading light over ramp.
Trailers Livestock Trailers Aluminum Gooseneck Diamond K Sales 15 American Drive Halsey Oregon 97348

Overview

Stock NumberAvailable To Order
ManufacturerEBY
ModelRuff Neck
ConditionNew

Connect with Diamond K Sales